CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
5. Bend the tab of the lock washer, then remove the bolt.
6. Remove the interlock bolt.
NOTE: Apply liquid gasket (P/N 08718-0001 or 08798-0003) to the threads before reassembly.
7. Remove the shift lever, shift arm, and interlock.
NOTE: Turn the shift lever boot so the hole in the boot is facing down.
8. Install the shift arm assembly in the reverse order of removal.
NOTE:
-
Use liquid gasket (P/N 08718-0001 or 08718-0003).
-
Remove the dirty oil from the sealing surface.
-
Seal the entire circumference of the bolt holes to prevent oil leakage.
-
If 20 minutes have passed after applying liquid gasket, reapply it and assemble the housings.
-
Allow it to cure at least 20 minutes after assembly before filling the transmission with oil.