CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-3229001.png)
Parking Pin Switch: Testing and Inspection
WARNING: SRS components are located in this area. Review the SRS component locations, precautions, and procedures under Air Bags
before performing repairs or service.
1. Remove the front console.
2. Disconnect the parking pin switch 2P connector.
3. Check for continuity between the terminals according to the table.
4. If necessary, replace the parking pin switch.
5. Remove the nut, then remove the parking pin switch.
