CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-5680001.png)
Power Window Switch: Testing and Inspection
Master Switch Test
1. Remove the door panel.
2. Remove the power window master switch from the armrest by removing the three mounting screws.
3. Check for continuity between the terminals in each switch position according to the tables.
Driver's Switch:
The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures No.
1, 2, 3 and 5. If the tests are normal, the driver's switch must be faulty.
Passenger's Switch:
