CL V6-3.0L SOHC (VTEC) (1999)
/Page-2973001.png)
Wheel Speed Sensor: Testing and Inspection
Component Inspection
FRONT/REAR
1. Check the front and rear pulser for chipped or damaged teeth.
2. Measure the air gap between the wheel sensor and pulser all the way around while rotating the pulser.
Standard: 0.4 - 1.0 mm (0.02 - 0.04 inch)
If the gap exceeds 1.0 mm (0.04 inch), check for a bent suspension arm.
NOTE: To inspect the rear wheel sensor air gap, remove the rear brake disc.
