CL V6-3.0L SOHC (VTEC) (1999)
2. Remove the splash guard from the knuckle.
NOTE: It is not necessary to remove the splash guard for hub unit or wheel bearing replacement.
3. Separate the wheel bearing from the front hub using the special tools and a press as shown.
CAUTION: Hold onto the hub to keep it from falling when pressed clear.
4. Press the wheel bearing inner race from the hub using the special tools and a bearing separator as shown.
CAUTION: Hold onto the hub to keep it from falling when pressed clear.
5. Replace the bearing with a new one after removal.