CL V6-3.0L SOHC (VTEC) (1999)
9. If the camshaft-to-holder oil clearance is out of tolerance:
-
And the camshaft has already been replaced, you must replace the cylinder head.
-
If the camshaft has not been replaced, first check total runout with the camshaft supported on V-blocks.
-
If the total runout of the camshaft is within tolerance, replace the cylinder head.
Camshaft Total Runout:
Standard (New): 0.03 mm (0.001 inch) maximum
Service Limit: 0.04 mm (0.002 inch)
-
If the total runout is out of tolerance, replace the camshaft and recheck. If the oil clearance is still out of tolerance, replace the cylinder head.