CL V6-3.0L SOHC (VTEC) (1999)
/Page-1103003.png)
1. Install the rings as shown.
NOTE:
-
The top ring has a 1B mark.
-
The second ring has a 2B mark.
Top Ring (Standard)
A: 3.1 mm (0.12 inch)
B: 1.2 mm (0.05 inch)
Second Ring (Standard)
A: 3.4 mm (0.13 inch)
B: 1.2 mm (0.05 inch)
NOTE: The manufacturing marks must be facing upward.
2. Rotate the rings in their grooves to make sure they do not bind.
3. Position the ring end gaps as shown:
