CL V6-3.0L SOHC (VTEC) (1999)
/Page-2185001.png)
Variable Valve Timing Solenoid: Testing and Inspection
INSPECTION
1. Disconnect the 1P connector from the VTEC solenoid valve.
2. Measure resistance between the terminal and body ground.
3. If the resistance is within specifications, remove the VTEC solenoid valve/oil filter assembly from the oil pump, and check the VTEC solenoid
valve filter for clogging.
-
If there is clogging, replace the engine oil filter and the engine oil.
