CL V6-3.0L SOHC (VTEC) (1999)
/Page-2269003.png)
10.
Install the manifold chamber on the intake manifold with the gaskets, brace, and mounting hardware you saved in step 3. Torque the bolts and nuts
to 12 Nm (8.7 lb-ft).
11.
Connect the other end of the PCV hose to the PCV valve with the hose clamp you saved in step 5.
12.
Reinstall the intake manifold with the original gasket. Be careful not to pinch the PCV hose. Torque the bolts and nuts to 22 Nm (16 lb-ft)
sequentially in two or three increments.
13.
Push the PCV valve into the cylinder head cover.
14.
Reinstall the components removed in step 1.
15.
Center-punch a completion mark above the second character (9) of the engine compartment VIN.
