CL V6-3.0L SOHC (VTEC) (1999)
/Page-2255003.png)
13.
Reinstall the intake manifold with the original gasket. Be careful not to pinch the PCV hose. Torque the bolts and nuts to 22 Nm (16 lb-ft)
sequentially in two or three increments.
14.
Push the PCV valve into the cylinder head cover.
15.
Reinstall the throttle body on the intake manifold with the new throttle body gasket(s) Torque the nuts and bolts to 22 Nm (16 lb-ft).
16.
Reinstall the components removed in step 1.
17.
Connect a PGM Tester, with S/N 000 (or higher) software and clear any stored DTCs. Make sure the MIL has gone off and stays off.
18.
Center-punch a completion mark above the second character (9) of the engine compartment VIN.
