CL V6-3.0L SOHC (VTEC) (1999)
/Page-65001.png)
Blower Motor Relay: Testing and Inspection
Blower Motor High Relay
NORMALLY-OPEN Type:
1. Remove the power relay from its socket.
Normally-open Type-Power Relays Test
2. Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 3 terminals when power and ground are connected to the No. 2 and No. 4 terminals.
-
There should be no continuity between the No. 1 and No. 3 terminals when power is disconnected.
Blower motor high relay
