CL V6-3.0L SOHC (VTEC) (1999)
Remove the five mounting nuts, then lift the front passenger's airbag out of the dashboard.
NOTE: Do not mix the lower mounting nuts with the upper mounting nuts. The upper mounting nuts are not self-locking.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
5. Install the new airbag(s):
-
Place the front passenger's airbag into the dashboard.
-
Loosely install all five mounting nuts.
-
Tighten the upper two nuts first, then tighten the lower three nuts.
6. Reconnect the airbag connector(s).