CL V6-3.0L SOHC (VTEC) (1999)
Steering Gear: Service and Repair
Disassembly
Steering Rack Disassembly
NOTE:
-
Before disassembling the gearbox, wash it off with solvent and a brush.
-
Do not dip seals and O-rings in solvent.
1. Remove the steering gearbox.
2. Remove the air tube and clips.
3. Remove the tie-rod end and locknut.
4. Remove the boot bands and tie rod clips. Pull the boots away from the ends of the gearbox.
5. Unbend the lock washer.