CL TYPE S V6-3.2L SOHC (2001)
General Module: Testing and Inspection
Multiplex Control Unit Input Test
Door Unit:
1. Remove the driver's door panel.
2. Disconnect the connectors (A) from the door multiplex control unit (B).
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
4. Make the following input tests at connector A.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
Passenger's Unit
5. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box.
