CL TYPE S V6-3.2L SOHC (2001)
Hood Sensor/Switch (For Alarm): Testing and Inspection
Hood Switch Test
1. Open the hood.
2. Disconnect the 2P connector from the hood switch.
3. Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 2 terminals when the hood is opened (lever released)
-
There should be no continuity between the No. 1 and No. 2 terminals when the hood is closed (lever pushed down)
4. If the continuity is not as specified, replace the hood switch.
