CL TYPE S V6-3.2L SOHC (2001)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
NOTE:
-
An assistant is helpful when removing the bumper.
-
Take care not to scratch the bumper and body.
-
Put on gloves to protect your hands.
1. Remove the bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the bumper engages the hooks of the bumper spacers and upper beam on each side securely.
-
Make sure the license plate light connector is plugged in properly.
-
Replace any damaged clips.