CL TYPE S V6-3.2L SOHC (2001)
Carpet: Service and Repair
Carpet Replacement
SRS components are located in this area. Review the SRS component locations and precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage, wrinkle, or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
-
Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio preset buttons.
-
Disconnect the negative cable from the battery, and wait at least three minutes before beginning work.
1. Remove these items:
-
Front seats
-
Dashboard lower cover
-
Rear console, M/T model, A/T model.
-
Console panel
-
Rear seat cushion, both sides, and the rear seat console
-
Door sill trim, both sides, and the kick panel, both sides
-
Slide bar, both sides
-
Fuel fill door opener cover
-
Floor mat anchors
2. Remove the carpet as shown.
3. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle, or twist the carpet.
-
Make sure the seat harness is routed correctly.
-
Slip the slits in the carpet over the hooks.
-
Replace any damaged clips.
-
A/T model: Make sure the parking brake cables are connected correctly. Adjust the parking brake cables.
-
Enter the anti-theft code for the radio, then enter the customer's radio station presets.