CL TYPE S V6-3.2L SOHC (2001)
Trim Panel: Service and Repair
Trim Removal/Installation - Rear Side Area
Trim Removal/Installation - Rear Side Area
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
2. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.
-
Push the clip portions securely into place.
