CL TYPE S V6-3.2L SOHC (2001)
Power Mirror Motor: Testing and Inspection
Power Mirror Actuator Test
1. Remove the door panel.
2. Disconnect the 6P connector (A) from the power mirror actuator (B).
3. Check actuator operation by connecting power and ground according to the table.
4. If the mirror fails to work properly, replace the mirror actuator.
Defogger Test
5. Check for continuity between the No. 1 and No. 2 terminals of the 6P connector. There should be continuity.
6. If the continuity is not as specified, replace the mirror holder.
