CL TYPE S V6-3.2L SOHC (2001)
-
Use the 2-part urethane primer surfacer and spray gun.
-
Mix the primer surfacer with the additive and solvent, and in the correct ratio.
-
Follow the primer surfacer manufacturer's instructions.
5. Drying
After spraying primer surfacer, allow 7-10 minutes of drying time, then force dry it with infrared lamps or other industrial dryer.
6. Polishing
Check the primer surfacer has dried thoroughly, then sand the primer surfacer.
Use the double action sander and #400-#600 disc paper.
7. Intermediate coating and top coating.