CL TYPE S V6-3.2L SOHC (2001)
Paint: Service and Repair
Use of the Repair Material (Reference)
Use of the Repair Material
NOTE: Follow the materials manufacturer's instructions.
The use of a special polyester putty for PP bumpers is described here:
1. Filler
2. Sanding filler
Spray the bumper primer on the area where the PP material was used.
3. Primer surfacer
The primer surfacer is used to protect the PP resin surface and fill cavities or flaws before the intermediate coat and top coat.
Use the 2-component type primer surfacer (gray).
4. Intermediate coat and top coat
Use the 2-part polyester urethane top coat. Top coat is also used for an intermediate coat.
Mixing Ratio:
