CL TYPE S V6-3.2L SOHC (2001)
Power Seat Motor: Testing and Inspection
Passenger's Power Seat Motor Test
Motor Test
Passenger's Seat:
1. Remove the passenger's seat.
2. Disconnect the 6P connectors from the adjustment switch (A) and the 8P connector from the passenger's power seat control unit.
3. Test the slide motor by applying battery voltage and body ground to the passenger's power seat control unit connector terminals.
4. Test the recline motor by applying battery voltage and ground to the adjustment switch connector terminals.
5. If a motor does not run or fails to run smoothly, check for an open in the power seat wire harness between the 6P adjustment switch connector or
the 8P passenger's power seat control unit connector and the 2P connectors. If the harness is OK, replace the affected motor.
