CL TYPE S V6-3.2L SOHC (2001)
4.
Put a thin piece of wood or metal, about 12 inches wide and less than 3/8 inch thick, into the seat-back pocket to prevent the drill from puncturing
the seat-back pocket.
5.
While wearing eye protection, use a 6.5 mm (0.257 inch) drill bit to drill two holes where you made the marks in step 3.
6.
Remove the piece of wood or metal from the pocket.
7.
Slip the stud plate into the back panel pocket and into the holes you drilled in step 5
