CL TYPE S V6-3.2L SOHC (2001)
NO - Repair open in the PUR wire.
6. Move the selector switch to Left.
7. Check for voltage between the B6 and B22 terminals with the power mirror switch pressed to the Right or Down.
Is there battery voltage?
YES - Go to step 8.
NO - Repair open in the BLU/RED wire.
8. Check for voltage between the B4 and B22 terminals with the power mirror switch pressed to the Left or Down.
Is there battery voltage?
YES - Go to step 9.
NO - Repair open in the ORN wire.
9. Turn the ignition switch OFF.
10. Disconnect the passenger's multiplex control unit 22P connector B.
11. Apply battery power to the B13 terminal and ground the B12 [or B14] terminal.
Does right mirror swing left [or tilt down] ?
YES - Go to step 12.
NO - Check the power mirror actuator. If the mirror is OK, repair the open in the YEL/WHT or LT GRN [BLU/WHT] wires.
