CL TYPE S V6-3.2L SOHC (2001)
Is there about 5 V?
YES - Go to step 17.
NO - Repair open or short in the BRN/WHT wire. If the wire is OK, faulty power mirror position sensor, replace the power mirror actuator.
17. Check for voltage between the B7 and B19 terminals while moving the mirror from right to left.
Does the voltage change from about 0.5 V to 4.5 V?
YES - Go to step 18.
NO - Repair open or short in the GRN wire. If the wire is OK, faulty right power mirror position sensor, replace the right power mirror actuator.
18. Check for voltage between the B10 and B19 terminals while moving the mirror from up to down.
Does the voltage change from about 0.5 V to 4.5 V?
YES - Go to step 19.
NO - Repair open or short in the GRN/RED wire. If the wire is OK, faulty right power mirror position sensor, replace the right power mirror
actuator.
19. Check for voltage between the B18and B19 terminals while moving the mirror from left to right.
Does the voltage change from about 0.5 V to 4.5 V?
YES - Go to step 20.
NO - Repair open or short in the GRN/WHT wire. If the wire is OK, faulty left power mirror position sensor, replace the left power mirror
actuator.
