CL TYPE S V6-3.2L SOHC (2001)
Power Seat Switch: Testing and Inspection
Recline Limit Switch Test
Recline Limit Switch Test
1. Remove the power seat adjustment switch cover.
2. Disconnect the 3P connector (A) from the recline switch.
3. Check for continuity between the terminals.
-
When the seat back is tilted forward fully with the release lever, there should be continuity between the No.3 and No.2 terminals.
-
When the seat back is tilted backward fully, there should be continuity between the No.1 and No.2 terminals.
4. If the continuity is not as specified, replace the limit switch.
