CL TYPE S V6-3.2L SOHC (2001)
Front Door Weatherstrip: Service and Repair
Door Front Seal
Door Front Seal Replacement
NOTE:
-
Take care not to scratch the door.
-
Use a clip remover to remove the clip.
1. Remove the front seal as shown.
2. Install the front seal in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
If the old seal is to be reinstalled, scrape off all traces of old butyl tape, then clean the seal surface with alcohol. Glue the new butyl tape onto
the seal.
-
Press the butyl tape portion against the door to make the adhesive stick.