CL TYPE S V6-3.2L SOHC (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
VSA-TCS Control Valve Assembly Replacement
VSA-TCS Control Valve Assembly Replacement
NOTE: Be careful not to damage the VSA-TCS control valve when handling the VSA-TCS control valve assembly.
1. Remove the battery.
2. Remove the intake air duct (A).
3. Disconnect the VSA-TCS control valve sensor 3P connector (A) and VSA-TCS control valve actuator 2P connector (C), then remove the
VSA-TCS control valve assembly.
4. Install the VSA-TCS control valve assembly in the reverse order of removal.