acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest:|01-017|Page 8164 > < Brake Pad|Front|Page 8158
Page 1
background image

Brake Rotor/Disc: Customer Interest
Brakes - Steering Wheel/Brake Pedal Vibration

01-017

July 16, 2010

Applies To:
1999-033.2 TL - ALL 
2001-03 3.2 CL - ALL

Brake Pedal, Steering Wheel, or Vehicle Vibrates While Braking 
(Supersedes 01-017, dated November 18, 2006, to revise the information marked with the black bars and asterisks)

*REVISION SUMMARY

^

Under WARRANTY CLAIM INFORMATION, the operation numbers, descriptions, and flat rate times were changed.

^

Under REPAIR PROCEDURE, the requirement to refinish new brake discs was removed.*

SYMPTOM

When the brakes are applied normally, the driver feels a pulsing sensation through the brake pedal, the steering wheel shakes, or the vehicle does not
have a smooth, continuous deceleration feeling.

PROBABLE CAUSE

The front and/or rear brake pads have caused a variation in the brake disc thickness.

CORRECTIVE ACTION

Refinish or replace the front brake discs, and install new brake pads. Test-drive the vehicle, and if necessary, refinish or replace the rear brake discs and
install new brake pads.

PARTS INFORMATION

Front Pad Set: P/N 45022-80K-A11 
Rear Pad Set: P/N 43022-SPO-020

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Failed Part:

P/N 45022-S0K-A01

Defect Code:

00401

Customer Interest:|01-017|Page 8164 > < Brake Pad|Front|Page 8158