CL TYPE S V6-3.2L SOHC (2001)
Parking Brake Cable: Adjustments
Parking Brake Check and Adjustment A/T Models:
Check
Press the parking brake pedal (A) with 294 N (30 kgf, 66 lbs) of force. The parking brake pedal should travel within the specified number of clicks
(B).
Pedal locked clicks: 2 - 4
If the number of clicks is excessive, adjust the parking brake pedal. Minor adjustment (1 - 2 clicks) of the parking brake pedal can be made with the
adjusting nut in the parking brake pedal. If a larger adjustment is required, do the major adjustment procedure using the adjuster at the parking brake
drum.
NOTE: After installing new brake shoes and/or new rear brake disc/drums, make sure to drive the vehicle for "Break-in".
Minor Adjustment
1. Raise the rear of the vehicle, and make sure it is securely supported.
2. Tighten the adjusting nut (A) until the parking brakes drag slightly when the rear wheels are turned.
3. Back off the adjusting nut in half turn increments, and check for proper adjustment.
Major Adjustment
1. Raise the rear of the vehicle, and make sure it is securely supported.
2. Release the parking brake pedal, and back off the adjusting nut (A) on the parking brake pedal.
3. Remove the rear wheels, and inspect the parking brake shoes.
