CL TYPE S V6-3.2L SOHC (2001)
Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair
Radiator Fan Switch B Replacement
Replacement
1. Set the No. 1 Piston at Top Dead Center (TDC).
2. Remove the upper covers.
3. To hold the timing adjuster in its current position, thread in the battery clamp bolt hand-tight (see step 14).
4. Loosen the idler pulley bolt about five or six turns, then remove the timing belt from the front camshaft pulley (see step 16).
5. Remove the front camshaft pulley (see step 5).
6. Disconnect the TDC 1/TDC 2 sensor connector, then remove the back cover (see step 6).
7. Disconnect the radiator fan switch B connector, then remove radiator fan switch B (A).
8. Install radiator fan switch B using a new O-ring (B).