CL TYPE S V6-3.2L SOHC (2001)
9. Remove the P/S hose clamp (A). Disconnect the Intake Manifold Runner Control (IMRC) actuator connector (B), then remove the IMRC actuator
(C) (J32A2 engine).
10. Remove two bolts securing the wire harness holder.
11. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
^
Intake air temperature (I/T) sensor connector
^
Idle Air Control (IAC) valve connector
^
Throttle Position (TP) sensor connector
^
Manifold Absolute Pressure (MAP) sensor connector