CL TYPE S V6-3.2L SOHC (2001)
10. Remove two bolts securing the wire harness holder.
11. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
^
Intake Air Temperature (IAT) sensor connector
^
Idle Air Control (IAC) valve connector
^
Throttle Position (TP) sensor connector
^
Manifold Absolute Pressure (MAP) sensor connector
12. Remove the upper cover (A), then remove the intake manifold (B).
13. Remove the cylinder head covers.
14. Set the No. 1 Piston at Top Dead Center (TDC). Align the pointer (A) on the front upper cover with the No. 1 Piston TDC mark (B) on the front
camshaft pulley.
