CL TYPE S V6-3.2L SOHC (2001)
6. Clamp the auto-tensioner (A) by using two 6 mm bolts (B) and a vise (C) as shown. Do not clamp the auto-tensioner itself.
7. Attach a torque wrench (A) to the pulley bolt. Measure the torque when the tensioner is turned counterclockwise. If the torque is less than the
specified value, replace the auto-tensioner.
8. If necessary, remove the pulley bolt (A) (left-hand threads), and replace the tensioner pulley (B).