CL TYPE S V6-3.2L SOHC (2001)
Air Conditioning Switch: Testing and Inspection
Except Type S Model
A/C Pressure Switch Circuit Troubleshooting (Except Type S Model)
1. Disconnect the A/C pressure switch 2P connector.
2. Turn the ignition switch ON (II).
3. Measure the voltage between the No. 2 terminal of the A/C presure switch 2P connector and body ground.
Is there about 5 V?
YES - Go to step 4.
NO - Go to step 10.
4. Turn the ignition switch OFF.
5. Check for continuity between the No. 1 and No. 2 terminals of the A/C pressure switch.
Is there continuity?
YES - Go to step 6.
NO - Go to step 11.
6. Reconnect the A/C pressure switch 2P connector.
7. Disconnect climate control unit connector B (20P).
8. Turn the ignition switch ON (II).
9. Measure the voltage between the No. 11 terminal of climate control unit connector B (20P) and body ground.
