CL TYPE S V6-3.2L SOHC (2001)
Control Module HVAC: Service and Repair
Climate Control Unit Bulb Replacement
Climate Control Unit Bulb Replacement (With Navigation System)
1. Discharge the static electricity (which accumulated on you when you removed the climate control unit) by touching the door striker or other body
parts.
2. Remove the self-tapping screws, then carefully separate the climate control unit display (A) and control unit (B). Do not kink or pull on the wires
between the display and the control unit. Do not touch the electronic components on the printed circuit board in the control unit.
3. Remove the bulb(s) with a flat-tip screwdriver.
4. Install in the reverse order of removal. After installation, operate the climate control unit to see if it works properly.
5. Run the self-diagnosis function to confirm that there are no problems in the system.
