CL TYPE S V6-3.2L SOHC (2001)
-
If you're installing a new evaporator, add refrigerant oil (DENSO ND-OIL 8)
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
-
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
-
Make sure that there is no air leakage.
-
Charge the system.
-
Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.
-
For '03 models: Perform the engine control module (ECM)/powertrain control module (PCM) idle learn procedure, and the power window
control unit reset procedure.