CL TYPE S V6-3.2L SOHC (2001)
9. Install the parts in the reverse order of removal with a new base gasket and new quick connect retainers, then check these items:
-
When connecting the wire harness, make sure the connection is secure and the terminal (B) is firmly locked into place.
-
Check that the tabs of the clamp (C) do not interfere with the wire harness.
-
Do not fold over the lower part of the mesh filter (D).
-
When installing the fuel gauge sending unit (A), make sure the connection is secure and the connector is firmly locked into place. Be careful
not to bend or twist it excessively.
