CL TYPE S V6-3.2L SOHC (2001)
5. Reconnect the 6P connectors.
6. Make sure the BRAKE LAMP light in the safety indicator comes on and goes off when the No. 3 terminal of the 6P connector is grounded, the
brake pedal is depressed, and the ignition switch is turned from OFF to ON (II).
-
If the BRAKE LAMP light in the safety indicator comes on and stays on, check for:
-
Faulty sensor.
-
Incorrect brake light bulbs or installation of brake light bulbs.
-
If the BRAKE LAMP light goes off, check for:
-
A poor ground (G 601).
-
An open in the WHT/GRN or BLK wire.