CL TYPE S V6-3.2L SOHC (2001)
Horn Switch: Testing and Inspection
Horn Switch Test
1. Remove the dashboard lower cover.
2. Remove the steering column upper and lower covers.
3. Disconnect the dashboard wire harness B 4P connector (A) from the cable reel (B).
4. Check for continuity between the cable reel No.2 terminal and body ground.
-
If there is continuity, the horn switch is OK.
-
If there is no continuity, go to step 5.
5. Remove the driver's airbag assembly.
6. Check for continuity between the cable reel No.2 terminal (A) and the horn switch positive terminal (B).
-
If there is no continuity, check the cruise control Set/Resume/Cancel switch. If the switch is OK, replace the cable reel and check for proper
operation.
-
If there is continuity, replace the driver's airbag.
