CL TYPE S V6-3.2L SOHC (2001)
3. Clean the camshaft pulleys. Set the camshaft pulleys to TDC by aligning the TDC marks (A) on the camshaft pulleys with the pointers (B) on the
back covers.
FRONT
REAR
4. If the auto-tensioner has extended and the timing belt cannot be installed, remove and compress the auto-tensioner.
5. Install the timing belt in a counterclockwise sequence starting with the drive pulley. Take care not to damage the timing belt when installing it.
-
1 Drive pulley (A).
-
2 Idler pulley (B).
-
3 Front camshaft pulley (C).
-
4 Water pump pulley (D).
-
5 Rear camshaft pulley (E).
-
6 Adjusting pulley (F).