CL TYPE S V6-3.2L SOHC (2001)
Valve Clearance: Adjustments
Adjustment
NOTE: Adjust the valves only when the cylinder head temperature is less than 100°F (38°C).
1. Remove the strut brace.
2. Remove the intake manifold cover (A) and ignition coil cover (B).
3. Remove the water bypass hoses (A). Disconnect the TCS control valve actuator connector (B) and TCS control valve angle sensor connector (C)
from the TCS control valve assembly, then remove the bolt (D) securing the TCS control valve bracket (J32A2 engine (A/T)).
4. Remove the Evaporative Emission (EVAP) canister hose (A).
