acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Tires:|06-034|Page 2823 > < All Technical Service Bulletins for Tires:|06-034|Page 2821
Page 2
background image

^

Reversible drill motor (800 RPM MAX)

^

Tire spreader

^

Inspection lamp

* For repairable injuries that exceed 25 degrees

TIRE REPAIR GUIDELINES

Never repair tires worn below 2/32 inch of tread.

Never repair a tire without removing the tire from the wheel for internal inspection.

Never repair a tire with a tread injury larger than 1/4 inch (6 mm).

Never use only a plug (stem) or a patch only to repair a tire injury.

NOTE

If the angle of the tire injury exceeds 25 degrees, you must use the two-piece repair system as recommended by the RMA.

MICHELIN PAX SYSTEM SUPPORT RING INSPECTION

PAX System support rings are not repairable, under any circumstances, but they can be reused if no damage is found during a thorough inspection. If a
PAX System tire ran flat or underinflated, dismount the tire from the wheel and inspect the wheel, tire, and support ring for damage. Refer to the
Michelin PAX Support Rings Technical Bulletin in ISIS. Enter SEARCH BY PUBLICATION, select Job Aids, then select Michelin PAX Support
Rings Technical Bulletin from the list.

All Technical Service Bulletins for Tires:|06-034|Page 2823 > < All Technical Service Bulletins for Tires:|06-034|Page 2821