acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Powertrain Control Module:|03-010|Page 5598 > < All Technical Service Bulletins for Powertrain Control Module:|03-010|Page 5596
Page 4
background image

Failed Part:

P/N 37820-P8E-A53

*Defect Code:

03217

Symptom Code:

01201*

Skill Level:

Repair Technician

Part used for repair:

Use the "RM" part number (from 
the repair order)
Example: 37820-PJE-A62RM

REPAIR PROCEDURE

1.

On 2000 3.2TLs and 2001 3.2CLs within the applicable VIN ranges, install a new fuel pressure regulator. For 3.2TLs, refer to page 11-173 of the
1999-03 3.2TL Service Manual. For 3.2CLs, refer to page 11-187 of the 2001-03 3.2CL Service Manual.

NOTE:

The new fuel pressure regulator has a black dot on top to help you identify it.

2.

Download the immobilizer key transponder codes from the PCM to the HDS (Honda Diagnostic System). Refer to REPLACING THE ECM/PCM
in Service Bulletin 00-019, Immobilizer System (Type 2).

3.

Remove and discard the PCM.

4.

Install the new PCM, and torque the bolts to 12 N.m (8.7 lb-ft).

5.

Upload the immobilizer key transponder codes from the HDS to the PCM. Refer to REPLACING THE ECM/PCM in Service Bulletin 00-019,
Immobilizer System (Type 2).

6.

Do the idle learn procedure:

^

Make sure all electrical items (A/C, audio unit, defogger, lights, etc.) are off.

^

Start the engine, and let it warm up to its normal operating temperature (the cooling fan cycles twice).

^

Let the engine idle (throttle fully closed and all electrical items off) for 10 minutes.

Disclaimer

All Technical Service Bulletins for Powertrain Control Module:|03-010|Page 5598 > < All Technical Service Bulletins for Powertrain Control Module:|03-010|Page 5596