CL TYPE S V6-3.2L SOHC (2001)
3.
With the transmission fully warmed up, check its 2-3 shift.
Does the transmission shift smoothly?
Yes - Go to step 4.
No - Continue with normal troubleshooting to find the cause of the harsh 2-3 shift.
4.
Download the immobilizer key transponder codes from the PCM to the HDS. Refer to REPLACING THE ECM/PCM in Service Bulletin 00-019,
Immobilizer System (Type 2).
5.
Remove the PCM, and install a new one, torquing its bolts to 12 N.m (8.7 lb-ft).
NOTE:
To order the correct PCM, use the ordering information under PARTS INFORMATION.
6.
Upload the immobilizer key transponder codes from the HDS to the new PCM. Refer to REPLACING THE ECM/PCM in Service Bulletin
00-019, Immobilizer System (Type 2).
7.
Do the idle learn procedure:
^
Make sure all electrical items (A/C, audio unit, defogger, lights, etc.) are off.
^
Start the engine, and let it warm up to its normal operating temperature (the cooling fan cycles twice).
^
Let the engine idle (throttle fully closed and all electrical items off) for 10 minutes.
8.
With the transmission fully warmed up, check its 2-3 shift.
Does the transmission shift smoothly?
Yes - Return the vehicle to the client.
No - Continue with normal troubleshooting to find the cause of the harsh 2-3 shift.
Disclaimer
