CL TYPE S V6-3.2L SOHC (2001)
12. Check for continuity between body ground and ECM connector terminal E19.
Is there continuity?
YES - Test the alternator.
NO - Repair open in the wire between the ECM (A19) and the alternator.
13. Turn the ignition switch OFF.
14. Disconnect ECM connector A (31P).
15. Check for continuity between body ground and ECM connector terminal A19.
Is there continuity?
YES - Repair short in the wire between the ECM (A19) and the alternator.
NO - Substitute a known-good ECM and recheck. If voltage is normal, replace the original ECM.
