CL TYPE S V6-3.2L SOHC (2001)
8. Coat the new O-rings (C) with clean engine oil, and put them on the injectors.
9. Insert the injectors into the rail (D) first.
10. Coat new seal rings (E) with clean engine oil, and press them into the intake manifold.
11. To prevent damage to the O-rings, install the fuel rails first, then install then install them in the intake manifold.
12. Install the fuel rail mounting bolts.
13. Install the connectors on the injectors.
14. Install the intake manifold and the intake manifold cover.
15. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for approximately two seconds, the fuel pressure in the
fuel line rises. Repeat this two or three times, then check for fuel leakage.
