CL TYPE S V6-3.2L SOHC (2001)
Variable Induction Control Valve: Testing and Inspection
Intake Manifold Runner Control (IMRC) Valve Inspection
NOTE: Do not adjust the IMRC adjusting screw (A).
1. Check for the clearance between the stopper (B) and the screw (A). It should be no clearance.
-
If there is a clearance, check and adjust the IMRC actuator cable.
-
If still there is a clearance after adjusting the IMRC actuator cable, the linkage may be stuck. Remove the intake manifold then check the
IMRC valve.
