CL TYPE S V6-3.2L SOHC (2001)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve ASSY A/B Replacement
Replacement
1. Remove the harness cover from the transmission hanger.
2. Remove the mounting bolts and the A/T clutch pressure control solenoid valves A and B (A).
3. Clean the mounting surface and fluid passages of the A/T clutch pressure control solenoid valves A and B and the transmission housing.
4. Place a new gasket (B) on the transmission housing, then install the 8 x 18 mm ATF feed pipes (C) with their filter side into the transmission
housing.
5. Install new O-rings (D) over the feed pipes, and install the 8 x 40 mm ATF feed pipe (E).
6. Install the new A/T clutch pressure control solenoid valves A and B (A) and harness clamp bracket (F).
7. Check the A/T clutch pressure control solenoid valves A and B connectors for rust, dirt, or oil, then connect them securely.
8. Install harness cover on the transmission hanger.