CL TYPE S V6-3.2L SOHC (2001)
17. If you feel too much or too little drag, loosen the locknut (A), and turn the adjusting screw (B) until the drag on the feeler gauge is correct.
18. Tighten the locknut and recheck the clearance. Repeat the adjustment if necessary.
19. Rotate the crankshaft clockwise. Align the pointer (A) on the front upper cover with the No. 4 piston TDC mark (B) on the front camshaft pulley.
20. Check and, if necessary, adjust the valve clearance on No. 4 cylinder.
21. Rotate the crankshaft clockwise. Align the pointer (A) on the front upper cover with the No. 2 piston TDC mark (B) on the front camshaft pulley.
22. Check and, if necessary, adjust the valve clearance on No. 2 cylinder.
23. Rotate the crankshaft clockwise. Align the pointer (A) on the front upper cover with the No. 5 piston TDC mark (B) on the front camshaft pulley.
24. Check and, if necessary, adjust the valve clearance on No. 5 cylinder.
